POWER CABLE (AS+) FIRE RESISTANT 600 V - 2000 V

Application

Secondary distribution in low voltage. Indoor installations of industrial, commercial and residential buildings that must continue to operate in case of exposure to fire. Suitable for installation in trays, compliance with Tray Cable (TC) flame test. Fire resistance test in accordance with IEC 60331.

Fire Resistance Test (Circuit Integrity): The flame must have sufficient power so that the cable surface reaches a temperature of 750°C 10 minutes after the fire is applied and this must be maintained for 120 minutes.

During this time and up to 15 minutes after the fire is extinguished, the conductors must be energized at Nominal Voltage.

Note: Any other application or use not described above is considered prohibited.

Construction

Conductor

Soft copper flexible conductor in size from 18 AWG - 2000 kcmil, covered with flame retardant mica tape.

Insulation

Cross-linked polyethylene (XLPE) compound.

Jacket

Halogen-free, low-smoke, flame retardant polyolefin compound (HFFR-LS).

Applicable Standards

• NTC 1099-1
• ICEA S-95-658

Certificate

CIDET N°02485

CIDET N°CP25_AA00633

Operating Voltage

600 V - 2000 V.

Identification

Single Cable: Insulation in natural base color and Black Jacket.

Muticonductor Cable: Insulation in colors and Black Jacket.

Packaging Unit

500 m or 1000 m reels. Other packaging units available upon request.